If you’re a vaper, you know that one of the most annoying things that can happen is when your vape starts leaking. Not only is it a pain to clean up, but it can also ruin your clothes, furniture, and anything else it comes into contact with. Luckily, there are a few things you can do to fix vape leakage. In this blog post, we’ll walk you through a few simple steps you can take to fix the problem.
Unscrew the Tank and Remove the Atomizer Coil:
If your vape is leaking, the first thing you should do is unscrew the tank and remove the atomizer coil. This will allow you to inspect the coil and see if it is damaged. If the coil is damaged, you will need to replace it. If the coil is not damaged, then you can reattach it and screw the tank back on.
Check the O-rings and Make Sure They are Properly Placed:
If you’re experiencing vape leakage, the first thing you should check is the O-rings. These small rubber rings are located around the atomizer head, and their main purpose is to create a seal so that e-liquid doesn’t leak out. If the O-rings are not properly in place, or if they’re damaged, it can cause leakage.
To check the O-rings, simply remove the atomizer head from the tank and take a look at them. Make sure they’re all in place and that there’s no damage to them. If everything looks good, then put the atomizer head back on and screw it tight. If you’re still seeing leakage, then proceed to the next step.
Check the Airflow Holes and Make Sure They Are Not Blocked:
If you’re still seeing leakage after checking the O-rings and screwing the atomizer head back on tight, then the next step is to check the airflow holes. These holes are located on the sides of the tank and they allow air to flow in and out. If these holes are blocked, they can cause leakage. To check the airflow holes, simply remove the tank from the mod and take a look at them. Make sure they’re not blocked by anything. If you see any debris or dirt blocking them, use a cotton swab or a toothpick to remove it. Once you’ve cleared the airflow holes, put the tank back on the mod and screw it tight. If you’re still seeing leakage, then proceed to the next step.
Fill the Tank with E-liquid, Screw it back on, and Screw on the Atomizer coil:
If you’re still seeing leakage after checking the O-rings and airflow holes, the next step is to fill the tank with e-liquid, screw it back on, and screw on the atomizer coil. Make sure you do not over-tighten the atomizer coil, as this can cause leakage. Once everything is screwed on tight, check for any leaks. If there are no leaks, then you’re all set!
Prime the Coil by Dripping E-liquid onto it and Then Suck on the Mouthpiece Without Pressing the Fire Button:
To prime, the coil, begin by removing the atomizer head from the tank. Next, drip e-liquid onto the coil, being sure to saturate it completely. Once the coil is saturated, reattach the atomizer head to the tank and screw it on tight. Finally, suck on the mouthpiece without pressing the fire button. This will pull e-liquid through the coil and wick, priming it for use.
Put the Tank Back on the Battery, Press the Fire Button, and Inhale Slowly:
After you’ve checked the O-rings and airflow holes, it’s time to reassemble the tank and attach it to the battery. Make sure the tank is screwed on tight, then press the fire button and inhale slowly. You might need to do this a few times to get a good vape, but once you do, you’ll be enjoying delicious, flavorful clouds of vapor. Vape leakage can be a frustrating issue to deal with, however, it is possible to fix it. By understanding the root cause of the problem and following the steps outlined in this guide. You can easily fix the vape leakage and get back to enjoying our vaping experience. From cleaning your tank and coils regularly to checking for loose connections and making sure that you have the right wattage, there are a few simple steps that you can take to ensure that your device is leakproof. With these tips in mind, you will be able to enjoy an uninterrupted vape session without having to worry about any leaks.